|
|
||||||||||||
|
Abstract The transition from centralized synchronousgeneration to distributed renewable energy sources has introduced significant challenges to power system dynamics and stability. This shift disrupts traditional assumptions in modelling methodologies and calls for a re-evaluation of simulation practices. Power system frequency stability is widely analysed through time domain electromechanical transient simulation, where the electrical frequency is calculated by the swing equation. However, with the growing share of converter-based, non-synchronous generation, this approach becomes problematic, as the electromechanical description can only be applied to certain parts of the generation portfolio. Electromagnetic transient simulation covers the timespan of such transients, however require more complex modelling techniques. This paper explores the limitations of the classical electromechanical transient stability analysis by simulation studies, while also discussing key research advancements in the field and shows simulation results of the discussed methods for frequency stability analysis. Key words: Power system stability, electromechanical transient, non-synchronous generation
References [1] P. Kundur et al. “Definition and Classification of Power System Stability” (IEEE/CIGRÉ Joint Task Force on Stability Terms and Definitions, IEEE Transactions on Power Systems, Vol. 19, No. 2, 2004) [2] CIGRE Joint Working Group C4/C6.35/CIRED: Modelling of inverter-based generation for power system dynamic studies, 2018. (Technical brossure 727) [3] N. Hatziargyriou et al. “Definition and Classification of Power System Stability – Revisited & Extended” IEEE Transactions on Power Systems, vol. 36, no. 4, pp. 3271–3281, July 2021 [4] Clark, P. Mitra, N. Johansson and M. Ghandhari, “Development of a Base Model in RMS and EMT Environment to Study Low Inertia System,” 2021 IEEE Power & Energy Society General Meeting (PESGM), Washington, DC, USA, 2021, pp. 1-5, doi: 10.1109/PESGM46819.2021.9637883. [5] G. Grdenić, F. J. C. García, N. d. M. D. Campos, F. Villella and J. Beerten, “Model Order Reduction of Voltage Source Converters Based on the Ac Side Admittance Assessment: From EMT to RMS,” in IEEE Transactions on Power Delivery, vol. 38, no. 1, pp. 56-67, Feb. 2023 [6] L. Steinhaeuser, M. Coumont, S. Weck and J. Hanson, “Comparison of RMS and EMT Models of Converter-Interfaced Distributed Generation Units Regarding Analysis of Short-Term Voltage Stability,” NEIS 2019; Conference on Sustainable Energy Supply and Energy Storage Systems, Hamburg, Germany, 2019, pp. 1-6. [7] A. Kuri, R. Zurowski, G. Mehlmann and M. Luther, “Converter Modelling Aspects at the Boundary between EMT and RMS Domain, “ 2022 International Conference on Smart Energy Systems and Technologies (SEST), Eindhoven, Netherlands, 2022, pp. 1-6 [8] S. Konstantinopoulos and D. Ramasubramanian, “On the Limitations of RMS IBR Models: A Small-Signal Perspective, “ 2024 IEEE Power & Energy Society General Meeting (PESGM), Seattle, WA, USA, 2024, pp. 1-5 [9] M. A. Cova Acosta et al., “Wind power plant modelling benchmark of RMS vs EMT simulation models for the electric reliability council of Texas (ERCOT) market, “ 20th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants (WIW 2021), Hybrid Conference, Germany, 2021, pp. 503-508 [10] Ahmed H. Yakout, Waheed Sabry, Almoataz Y. Abdelaziz, Hany M. Hasanien, Kareem M. AboRas, Hossam Kotb, Enhancement of frequency stability of power systems integrated with wind energy using marine predator algorithm based PIDA controlled STATCOM, Alexandria Engineering Journal, Volume 61, Issue 8, 2022 |
||||||||||||
![]() |
||||||||||||
![]() |
||||||||||||
|
||||||||||||