Real time simulation applied to the implementation of generic wind turbine models A. Lorenzo-Bonache, R. Villena-Ruiz, A. Honrubia-Escribano and E. Gómez-Lázaro   2017/04/25

Abstrac

This paper presents the use of real time simulation applied to the development of generic wind turbine models, defined by IEC 61400-27-1, which are used in order to obtain an accurate behaviour under power system stability concerns without the need of many computation resources.
These models have been implemented to be simulated in a real-time simulator. In contrast with conventional simulation tools, real time simulation allows dynamic interaction with the model, and hence the adjustment of models is faster and easier. It is also presented how physical devices can be implemented within the model aiming at an improved interaction approach.

Authors and affiliations

A. Lorenzo-Bonache, R. Villena-Ruiz, A. Honrubia-Escribano and E. Gómez-Lázaro
Department of Wind Energy and Power Systems. Renewable Energy Research Institute and DIEEAC/EDII-AB
Universidad de Castilla-La Mancha, Albacete, Spain

Key word

IEC 61400-27-1, Real Time Simulation, Standard models, Wind turbines.

References

[1] GWEC, “GLOBAL WIND REPORT 2015 | GWEC,” 2016.
[2] F. Jimenez, E. Gómez-Lázaro, J. A. Fuentes, A. Molina-García, and A. Vigueras-Rodríguez, “Validation of a DFIG wind turbine model and wind farm verification following the Spanish Grid Code,” Wind Energy, vol. 15, no. 4, pp. 645–659, May 2012.
[3] A. Honrubia-Escribano, S. Martín-Martínez, A. Estanqueiro, F. Jiménez Buendía, and E. Gómez Lázaro, “Simplified wind turbine models for wind energy integration into power systems,” Eur. Wind Energy Conf., p. 6pp, 2015.
[4] F. Jiménez, E. Gómez-Lázaro, J. A. Fuentes, A. Molina-García, and A. Vigueras-Rodríguez, “Validation of a DFIG wind turbine model submitted to two-phase voltage dips following the Spanish Grid Code,” Renew. Energy, vol. 57, pp. 27–34, 2013.
[5] A. Honrubia-Escribano, F. Jiménez Buendía, A. Molina-Garcia, J. A. Fuentes-Moreno, E. Muljadi, and E. Gómez Lázaro, “Analysis of Wind Turbine Simulation Models : Assessment of Simplified Versus Complete Methodologies,” XVII Int. Symp. Electromagn. Fields Mechatronics, Electr. Electron. Eng, p. 8, 2015.
[6] P. Sørensen, B. Andresen, J. Fortmann, K. Johansen, and P. Pourbeik, “Overview , status and outline of the new IEC 61400 -27 – Electrical simulation models for wind power generation,” 10th Int. Work. Large-Scale Integr. Wind Power into Power Syst., 2011.
[7] H. Zhao, “Coordinated control of wind power and energy storage,” DTU, 2014.
[8] P. Sørensen, J. Fortmann, F. J. Buendia, J. Bech, A.Morales, and C. Ivanov, “Final Draft International Standard IEC 61400-27-1 Electrical simulation models of wind turbines,” in 13th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Plants, 2014.
[9] H. Zhao, Q. Wu, I. Margaris, J. Bech, P. E. Sørensen, and B. Andresen, “Implementation and validation of IEC generic type 1A wind turbine generator model,” Int. Trans. Electr. Energy Syst., vol. 25, no. 9, pp. 1804–1813, 2015.
[10] A. Honrubia-Escribano, E. Gomez-Lazaro, A. Vigueras-Rodriguez, A. Molina-Garcia, J. a. Fuentes, and E. Muljadi, “Assessment of DFIG simplified model parameters using field test data,” 2012 IEEE Power Electron. Mach. Wind Appl., pp. 1–7, 2012.
[11] P. Sorensen, B. Andresen, J. Fortmann, and P. Pourbeik, “Modular structure of wind turbine models in IEC 61400-27-1,” in IEEE Power and Energy Society General Meeting, 2013.
[12] J. Belanger, P. Venne, and J.-N. Paquin, “The What, Where and Why of Real-Time Simulation,” PES IEEE Gen. Meet., pp. 37–49, 2010.
[13] C. Dufour, S. Abourida, and J. Belanger, “Hardware-In-the-Loop Simulation of Power Drives with RT-LAB,” Power Electron. Drives Syst. 2005. PEDS 2005. Int. Conf., vol. 2, pp. 1646–1651, 2005.
[14] F. Jiménez, A. Vigueras-Rodríguez, E. Gómez-Lázaro, J. A. Fuentes, and A. Molina-García, “Validation of a Mechanical Model for Fault Ride--Through: Application to a Gamesa G52 Commercial Wind Turbine,” IEEE Trans. Energy Convers., vol. 28, no. 3, pp. 707–715, 2013.
[15] A. J. Pujante, J. A. Fuentes, E. Gómez-Lázaro, A. V. Rodriguez, and A. Molina-García, “Performance comparison of a 2 MW DFIG wind turbine model under wind speed variations,” in European Wind Energy Conference and Exhibition, 2009, pp. 121–124.
[16] A. Honrubia-Escribano, F. Jiménez-Buendía, E. Gómez-Lázaro, and J. Fortmann, “Validation of Generic Models for Variable Speed Operation Wind Turbines Following the Recent Guidelines Issued by IEC