Forklifts, Automated Guided Vehicles and Horizontal Order Pickers in Industrial Environments. Energy Management of an Active Hybrid Power System based on Batteries, PEM Fuel Cells and Ultracapacitors. J.S. Artal-Sevil, J.L. Bernal-Agustín, R. Dufo-López and J.A. Domínguez-Navarro 2017/04/25

Abstract

The renewable energies together with other technologies in low CO2 emissions and the efficiency must be the base of the most sustainable new energetic system. Currently the logistics industry has a large number of vehicles (forklifts, horizontal order pickers, automated guided vehicles AGVs, tow
vehicles, captive fleets applied to logistic...) intended to transport goods inside the plant. A problem associated with these logistic vehicles (electric or combustion type) is the charging time and
balancing time in the batteries. Solution to the problem approached would be a system that requires a power charging times relatively short (similar to filling in the combustion system) and at the same time that have zero emissions (do not forget that they are operating in a closed environment). Typically, automated guided vehicles and forklifts are operated with leadacid batteries. The replacement of the traction battery with active hybrid power supply provide advantages as longer operating time, no recharging batteries, sizing of the fuel cell can be reduced and energy recovery during braking. Thus, energy management of an Active Hybrid Power System based on Li+ batteries, ultracapacitors and PEM fuel cells, is presented in this paper. Original lead-acid battery can be easily replaced by this new system implemented for industrial vehicles.

Authors and affiliations

J.S. Artal-Sevil, J.L. Bernal-Agustín, R. Dufo-López and J.A. Domínguez-Navarro
Department of Electrical Engineering. EINA Escuela de Ingeniería y Arquitectura. University of Zaragoza.
Campus Río Ebro – Zaragoza (Spain)

Key word

Hybrid Power System, PEM Fuel Cell, Ultracapacitors, Li+ Batteries, Energy Management, Automated Guided
Vehicles, Forklifts, Horizontal Order Picker.

References

[1] Barbir F. "PEM Fuel Cells; Theory and Practice". Elsevier Academic Press, New York 2005.
[2] Dowling Kevin. "Power Sources for Small Robots". Field Robotics Center. Carnegie Mellon University. Pittsburgh.
Jan 1997. Report CMU-RI-TR-97-02.
[3] Kim S., Choi S., Lee J., Hong S. and Yoon J. "A study of hybrid propulsion system on forklift trucks". World Electric Vehicle Symposium and Exhibition (EVS27). November 2013, Barcelona (Spain); pp.: 1 – 8.
[4] Elgowainy A., Gaines L. and Wang M. "Fuel-cycle analysis of early market applications of fuel cells: Forklift
propulsion systems and distributed power generation". International Journal of Hydrogen Energy. May 2009,
Volume 34, Issue 9, PP.: 3557-3570.
[5] Renquist J.V., Dickman B. and Bradley T.H. "Economic comparison of fuel cell powered forklifts to battery powered forklifts". International Journal of Hydrogen Energy. September 2012, volume 37, issue 17, pp.: 12054-12059.
[6] Burke A.F. "Batteries and ultracapacitors for electric, hybrid and fuel cell vehicles". Proceeding of the IEEE,
volume 95, issue 4, pp 806 to 820. April 2007.
[7] Jeong K.S. and Oh B.S. "Fuel economy and life-cycle cost analysis of a fuel cell hybrid vehicle". Elsevier Science Direct. Journal of Power Sources 2002, volume 105, pp 58 to 65.
[8] Thounthong P., Chunkag V., Setthakul P., Davat B. and Hinaje M. "Comparative Study of Fuel-Cell Vehicle
Hybridization with Battery or Supercapacitor Storage Device". IEEE Transaction on Vehicular Technology,
volume 58, issue 8. October 2009.
[9] Thounthong P., Raël S. and Davat B. "Test of a PEM fuel cell with low voltage static converter". Elsevier Science
Direct. Journal of Power Sources 2006, volume 153, pp 145 to 150.
[10] Di Napoli A., Crescimbini L., Solero G., Pede G. Lo Banco G. and Pasquali M. "Ultracapacitor and Battery storage system supporting fuel-cell powered vehicles" Proceeding of the 18th International Electric Vehicle Symposium. Berlin (Germany) 2001.
[11] Ayad M.Y., Pierfederici S., Raël S. and Davat B. "Voltage regulated hybrid DC power source using supercapacitors as energy storage devices". Energy Conversion Management, volume 48, issue 7, pp 2196 to 2202. July 2007.
[12] Hosseinzadeh E., Rokni M., Advani S.G. and Prasad A.K. "Performance simulation and analysis of a fuel cell/battery hybrid forklift truck". International Journal of Hydrogen Energy. April 2015, volume 38, issue 11, pp.: 4241-4249.
[13] Pesaran A., Zolot M., Markel T. and Wipke K. "Fuel cell/Battery hybrids: an overview of energy storage hybridization in fuel cell vehicles". Proceeding of the 9th Ulm Electrochemical Talks. Ulm (Germany) 2004.
[14] Gauchia L., Bouscayrol A., Sanz J., Trigui R. and Barrade P. "Fuel Cell, Battery and Supercapacitor Hybrid System
for Electric Vehicle: Modeling and Control via Energetic Macroscopic Representation". IEEE Vehicle Power and
Propulsion Conference. September 2011, Chicago, United States. <hal-01218789>.
[15] Farhadi M. and Mohammed O. "Energy Storage Technologies for High-Power Applications". IEEE Transactions on Industry Applications. Volume: 52, Issue: 3 June 2016; pp.: 1953 – 1961.