STUDY OF A FLAT PLATE SOLAR COLLECTOR WITH AN AIR CONDITIONER RADIATOR AS A HEAT ABSORBER FOR A DOMESTIC WATER HEATER   Vikas Reddy Chittireddy, Ahmed ElSawy and Stephen Idem   2018/04/20

Abstract

The objective of this study was to build a thermally efficient solar water heater. The receiver plate was constructed from an air conditioner radiator, and consisted of an array of serpentine tubes through which water was circulated. The presence of high density corrugated fins attached to the tubes increased the absorption of incident solar radiation. The flat plate collector was enclosed by double glazing which admitted solar radiation and minimized convection heat transfer losses to the environment. The shell of the collector was insulated to reduce conduction losses. A numerical model of flat plate solar collector thermal performance was developed and is likewise described in this paper. The model predicted the useful heat transfer to the water using an energy balance approach. An experimental program that was devised to verify the accuracy of the thermal performance model. Under certain circumstances close agreement was obtained between model predictions and experimental measurements, making the performance model of the flat plate solar collector a useful design tool.

Authors and affiliations

Vikas Reddy Chittireddy1, Ahmed ElSawy2*, and Stephen Idem3
2 M.S. In Mechanical Engineering Candidate and 2, 3 Professors and Faculty Advisors
College of Engineering, Tennessee Technological University, Cookeville, Tennessee 38505, USA

Key words

Solar water heater, flat plate collector, double glazing, energy balance, Newton-Raphson method

References

[1] 1. Zelzouli, K., Guizani, A., Sebai, R. and Kerkeni, C. (2012), "Solar Thermal Systems Performances versus Flat Plate Solar Collectors Connected in Series," Engineering, Vol. 4, No. 12, pp. 881-893. doi: 10.4236/eng.2012.412112.
2. Jouhari, M., Touhmeh, S. and Moukhayber, N. (2015), Manufacturing and Thermal Performance Test of (Compound) Solar Collector in Damascus City. Journal of Biomedical Science and Engineering, Vol. 8, pp. 370-379. doi:10.4236/jbise.2015.86035.
3. Ben Slama, R. (2012), "Experimentation of a Plane Solar Integrated Collector Storage Water Heater," Energy and Power Engineering, Vol. 4, No. 2, pp. 67-76. doi: 10.4236/epe.2012.42010.
4. Ihaddadene, N., Ihaddadene, R., Mahdi, A. (2014), “Effect of Glazing Number on the Performance of a Solar Thermal Collector”, International Journal of Science and Research, Vol. 3, Issue 6, pp. 1199-1203.
5. Ihaddadene, N., Ihaddadene, R., Mahdi, A. (2014), “Effect of Distance between Double Glazing on the Performance of a Solar Thermal Collector”, International Conference on Renewable Energies and Power Quality (ICREPQ’14) Cordoba (Spain), pp. 302-306.
6. Al-Khaffajy, M. and Mossad, R. (2013), “Optimization of the Heat Exchanger in a Flat Plate Indirect Heating Integrated Collector Storage Solar Water Heating System”, Renewable Energy, volume 57, pp. 413-421.
7. Shukla, R., Sumathy, K., Erickson, P., and Gong, J. (2013), “Recent advances in the solar water heating systems: A review,” Renewable and Sustainable Energy Reviews, Vol. 19, pp. 173-190.
8. ASHRAE. 2013. ASHRAE Handbook – Fundamentals, Chapter 4, Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
9. http://www.plexiglas.com/export/sites/plexiglas/.content/medias/downloads/sheet-docs/plexiglas-general-information-and-physical-properties.pdf.
10. https://www.wunderground.com/personal-weather-station/dashboard?ID=KTNCOOKE16#history.
11. Kalidasan, B. and Srinivas, T. (2014), “Study on Effect of Number of Transparent Covers and Refractive Index on Performance of Solar Water Heater,” Journal of Renewable Energy, Article ID 757618. doi:10.1155/2014/757618.