 |
Passive solar systems
enhanced efficiency M. Belik
2019/07/15 |
Abstract
This article discusses the efficiency of passive solar systems auxiliary integrated into buildings and focuses on trombe wall. The first paragraph deals with measurement methods applicable for passive systems. Following chapter describes the elimination and correction of result uncertainities. The main part focuses on measurement and evaluation of trombe wall. The real passive solar system is integrated into model family house. The optimisation process and improvements are explained as the main result of this research.
| Published in: Renewable Energy & Power Quality Journal (RE&PQJ, Nº. 17) | |
| Pages: 235-239 | Date of Publication: 2019/07/15 |
| ISSN: 2172-038X | Date of Current Version:2019/04/10 |
| REF: 275-19 | Issue Date: July 2019 |
| DOI:10.24084/repqj17.275 | Publisher: EA4EPQ |
Authors and affiliations
M. Belik
Department of Power Engineering and Ecology. University of West Bohemia.
Plzen (Czech Republic)
Key words
Passive solar system, trombe wall, heat penetration, emisivity.
References
[1] M. Kreidl, “Mereni teploty”, BEN, Praha,
2005.
[2] J. Cihelka, “Solarni tepelna technika”, T. Malina, Praha,
1994.
[3] M. Hanova. “Trombe wall for familly house heating assessment,
Master thesis”, ZCU, Pilsen, 2009.
[4] T. Langhammer, „Passive solar systems optimization, Master thesis”,
ZCU, Pilsen, 2011.
