Design and Analysis of Solar/Wind Power Electronics Converters

Akram A. Abu-aisheh

 

2019/07/15

Abstract

The primary objective of this paper is to present thedesign and analysis of a power converter for a hybrid solar/wind micro grid energy conversion system. The power converter can transfer the power from a wind generator and photovoltaic panels and improve the safety and stability of hybrid micro grid systems. This micro grid system consists of Permanent Magnet Synchronous Generator (PMSG), a full wave AC-DC bridge rectifier, a DC-DC boost converter, a bidirectional DC-DC converter, and a full wave bridge DC-AC inverter. The wind generator and the photovoltaic panels are used as the primary power sources of the system, and a battery is used for energy storage and to compensate for the irregularity of the power sources. This paper also presents the structure of the rectifier stage for the power conversion system. This structure provides two energy sources simultaneously yet independently, according to their respective availability. Analysis for the power conversion system will be discussed in this paper and will give a design and analysis plan for hybrid wind/solar converter circuit. The power converter can transfer the power from a wind generator and photovoltaic panel.
The wind generator and the photovoltaic panel are used as the primary power sources of the system, and a battery is used for energy storage and to compensate for the irregularity of the power sources. This paper also presents the structure of the beginning rectifier stage for the hybrid wind- solar energy power conversion system. This structure thereby provides two energy sources simultaneously yet independently, according to their respective availability. Analysis for the power conversion system will be discussed in this paper and will give a design and analysis plan for hybrid wind/solar converter circuit.

Published in: Renewable Energy & Power Quality Journal (RE&PQJ, Nº. 17)
Pages: 349-353 Date of Publication: 2019/07/15
ISSN: 2172-038X Date of Current Version:2019/04/10
REF: 309-19 Issue Date: July 2019
DOI:10.24084/repqj17.309 Publisher: EA4EPQ

 

Authors and affiliations

Akram A. Abu-aisheh
Department of Electrical and Computer Engineering University of Hartford,West Hartford, CT, USA

Key words

Hybrid, solar, wind, Power converter, Micro-grid.

References

[1] Patel MR. Wind and solar power systems design analysis and operation. 2nd ed. Taylor and Francis Group Publishing Co. 2006; 30(3):265–6.
[2] http://www.fao.org/docrep/010/ah810e/AH810E10.htm
[3] Chen YM, Liu YC, Hung SC, Cheng CS. Multi-input inverter for grid-connected hybrid PV/wind power system. IEEE Transactions on Power Electronics. 2007 May; 22(3):1070–7.
[4] Sumathi, S.; L. Ashok Kumar; P. Surekha. “Solar PV and Wind Energy Conversion Systems: An Introduction to Theory, Modeling with MATLAB/SIMULINK, and the Role of Soft Computing Techniques.” Switzerland: Springer International Publishing. 1st Edition; 2015.
[5] US Department of Energy. “Hybrid Wind and Solar Electric Systems.” Online. Accessed 07 June 2016.
<http://energy.gov/energysaver/hybrid-wind-and-solar-electric-systems>